This is a pair of vintage style copper and brass taps pillar, handmade and water pressure tested. These vintage style brass taps have copper pipework, vintage style brass tap heads and come with a detachable end brass nozzle. They would look great in any copper bathroom or copper kitchen, alongside a Belfast sink or would make a great addition to a camper van conversion or boat renovation.
These may not be suitable for some baths due to the pipework size. If these are for a bath, please check first. These come supplied with 6 fitting screws and would also look fabulous with any Belfast sink.
As these taps are fixed by screws from the top, not from a nut underneath, they may not be suitable for a quartz/granite/slate/marble top; these are suitable for wooden and laminate worktops. These have been well made and have a nicely polished finish. All handmade and available as made to measure at no extra cost. Total height including tap head (excluding fittings below) 26cm. Total measurement from tap outlet excluding detachable nozzle to base of tap fitment 16.5cm.
Outlet projection from pipe centre to tap outlet centre 12cm. 15mm tail connections, suitable for all standard kitchen sinks and bathroom basins (check with your plumber if these are for a bath). This item is in the category "Home, Furniture & DIY\Kitchen\Kitchen Taps".The seller is "duotech998" and is located in this country: GB. This item can be shipped to United Kingdom.